CALL LENT's MACHINERY TODAY: 541.350.4967 Proceed to lentmachinery.com
 
PET SERIES EDGEBANDERS
 
Pro Edge Technology, LLC has designed the PET Edgebander Series to fill the void in the woodworking industry for a high-quality, easily maintained, affordable Edgebander.

From our compact model, PET I, to our largest production model, PET IV, we developed an Edgebander that uses the same heavy-duty processing stations across the line. The only change between each model is the number of processing stations and length of machine.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.
 
 
PET I Edgebander

PET I is compact and equipped with features previously reserved for high-end machines.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.

Heated Infeed Fence | Glue Station | Strip Feed System | Guillotine | 4-Roller Pressure Station
2 Motor End Trim | Super Finish | Flat Scrape | Buffing

All at a price you can afford!

MORE INFO / CONTACT US!

PET II Edgebander

The PET II Edgebander comes standard with features that are upgrades on our competitors’ machines.
From the Infeed to the Buffing, each station is independent for a more serviceable machine.

No matter if you are using coil-type edgebanding or pre-cut edgebanding strips, this machine was designed to meet the high quality of product today’s market demands. The glue application is uniquely controlled by a pneumatic metering wiper and hardened application roller followed by a 4-Roller Pressure Station.

From short to long production runs, our high quality finished product doesn’t require touching up after exiting the machine.

MORE INFO / CONTACT US!
PET III Edgebander

PET III is designed for the highest processing quality, speed and extreme duty demands with an
added Pre-Mill Station and a motorized positioning pressure beam. The Pre-Mill Station ensures your product’spreviously machined edge has a perfect finish. The Pre-Mill Station defines the difference between an“acceptable” machined edge and a “perfect” machined edge.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.

Pre-Mill | Glue Station | Strip Feed System | Guillotine | 4-Roller Pressure Station
2 Motor End Trim | Rough Trim | Super Finish | Flat Scrape | Buffing

MORE INFO / CONTACT US!
PET IV Edgebander

PET IV is our overachiever! This machine has all the stations mentioned on the previous models, plus: (2) motor Corner Rounding Station, 3mm Radius Scrape Station, (2) Hot Air Blowers, a Misting Station and a complete dust manifold with hardware.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.

Pre-Mill | Glue Station|Strip Feed System|Guillotine|4-Roller Pressure Station
2 Motor End Trim | Rough Trim | Super Finish | 2 Motor Corner Rounding
3mm Radius Scrape | Flat Scrape | 2 Hot Air Blowers | Misting Station | Buffing

MORE INFO / CONTACT US!
 
PET SERIES CNC ROUTERS
 
CNC FLAT TABLE ROUTER

The Pro Edge Technology CNC Flat Table Router, PET 510-FT, represents the latest in technology advancements and plays a critical role in today’s high production demands in processing engineered and solid woods for the JIT manufacturing environment.

The PET 510-FT CNC Router is unsurpassable in productivity, safety, reliability and operational efficiency in its class.
  • Moving gantry (stationary table) type machine
  • 1 12hp router spindle
  • 8 position automatic tool changer with tool length measuring device
  • 1 2.25hp (1.7 kW) multiple spindle boring block
  • 9 independently selectable spindles for vertical drilling
  • 2 EUROVAC 9hp vacuum pumps
  • 4 x 8, 5 x 8, 5 x 9, 5 x 10 selectable vacuum zones
  • Fanuc Oi control, Fanuc drivers, Fanuc servo motors

    MORE INFO / CONTACT US!
 
CNC Machining Center | PET 1233 P-T-P / Pod and Rail

The CNC Machining Center, Model PET 1233 P-T-P is ideal for either
the high production panel processing shop or the custom production shop.

  • High Speed Spindle (HSK)
  • 8-Position Tool Changer
  • Boring Block
  • Pod & Rail
  • Guide Rail - Large 25 mm
  • Centralized Lubrication System
  • Syntec Control System
  • Delta Servo Drives on X, Y & Z-Axis
  • Standard Wiring
  • Heavy Duty Machine Frame

    MORE INFO / CONTACT US!
 
PET SERIES WIDE BELT SANDERS
 
Automatic Wide Belt Sanders | APS Series
Precision, Reliability & High Quality Production at an Affordable Price!

We are proud to showcase the APS Series, Automatic Wide Belt Sanders, model APS-SC (single-head sander) and model APS-DSC (double-head sander), both models available in 36”, 43” and 52” belt sizes.

Each model is equipped with technical solutions using today’s technology and many options only found on the larger sanding machines in themarketplace giving you the versatility and flexibility to fulfill all your production needs including:

Calibration/Stock Removal | Fine Sanding of Solid Woods | Sanding of Veneered Panels | Honey Combed Panels and a wide variety of different materials!

MORE INFO / CONTACT US!

 
PET SERIES CNC BEAM SAW
 
CNC Beam Saw PBS 3200 / PBS 3800

Engineered to process your wood-based and plastic panel material with more speed and efficiency by utilizing today’s reliable and easy-to-use cutting technology using automated features, such as:
  • Easy-to-use programmable controller with board cut optimization software for fully automatic cutting cycles reducing the amount of material waste.
  • Real-time simulation of both saw and panel operation.
  • CNC servo driven program fence and saw carriage.
  • Variable saw carriage speed with high speed return.
  • Phenolic air floatation tables.
  • Full length pneumatic pressure beam.
  • Automatic side alignment device.
  • Separate scoring blade for chip-free cutting.
  • Standard length of cut: 10’ & 12’.
  • Individual or stacked material; up to 4” stack height.

    MORE INFO / CONTACT US!

 
CNC BORE & DOWEL INSERTER
 
CNC Point-to Point Drilling, Gluing,
Dowel Insertion and Dado Machine


Our CNC Bore and Dowel Insertion machine maintains the highest degree of accuracy for
every application with these STANDARD features:
  • TOTAL CNC CONTROL on the X, Y and Z axis
  • Hardened helical rack and pinion drive on the X axis to promote speed with smoothness
  • Reciprocating ball screw drive on the Y and Z axis
  • Brushless servo driven motors on the X, Y and Z axis
  • 4 independent working zones
  • Variable speed electro spindle for dado
  • Large capacity auto feeding vibrator hopper
  • Intuitive software programming built-in for operator interface
  • Wireless barcode reader

    MORE INFO / CONTACT US!

 
IR LINEAR DRYER
 

The PET IR LINEAR DRYER is a 100% water based application system designed to eliminate the traditional “air drying” of water based products. The PET IR LINEAR DRYER was engineered to eliminate the long drying times associated with using a water based product which can lead to product contamination and excessive material handling.

The product is fed directly into the PET IR LINEAR DRYER, finishing the product with a clean and dry surface ready for the next step in the production of the product being manufactured or stack-and-ready for shipment.

  • Open Track Design for 4-sided exposure to the IR lamps for 4-sided drying.
  • Tapered track rails specifically designed to only make contact on the board at two small points, along the bottom corner edges, per section of track.
  • Adjustable track spacing from 2” centers to 4’ centers and above.
  • Variable track speeds: up to 16 m/min.
  • Adjustable IR lights adjusts the distance between the IR lights and the product ensuring and maintaining a constant temperature.
  • Complete access panels on both sides of the dryer and on both top & bottom of track for daily inspection, cleaning and maintenance.
  • UL Listed electrical components; available on the U.S. market.

    MORE INFO / CONTACT US!

 
CNC 700 DOVETAIL MACHINE
 

The CNC700 Dovetail Machine is a multifunctional drawer box machining center

The machining can be configured to do Dovetail, French Dovetail, Straight Dovetail and Irregular Spaced Dovetails.

Standard Features Include:

  • Cuts dovetail mortise and tenon simultaneously for accurate dovetail joints.
  • Dovetail width and depth are adjustable through the HMI controller.
  • Single part and automatic continuous tenoning motion.
  • Adjustable feed speed for cutting various materials.
  • The spindle is adjustable for cutter wear compensation. The carbide cutter can be resharpened
    approx. 12 times. Diamond tooling is available as an option.
  • The workpieces are placed together on the machine for cutting dovetail mortise and tenons ensuring precision jointing accuracy.

    MORE INFO / CONTACT US!
 
SLIDING PANEL SAW
 

Sliding Panel Saws | SPS 10' & 12'
Standard Configuration:
  • Electrical raise and lowering of main blade with digital display
  • Electrical/mechanical brake on main saw motor
  • Main Saw Motor: 10 HP
  • Manual tilting of saw carriage with digital display
  • Main blade has 3 different RPM settings with digital display
  • Standard sliding table lengths: 10’ and 12’
  • Adjustable rip fence with micro adjustment

    MORE INFO / CONTACT US!
 
 
 
 
 
 

CALL TODAY: 541.350.4967

Customer Service: info@lentmachinery.com



Pro EdgeTechnology, LLC
P.O. Box 539 | Ellenton, FL 34222
Ph 844 PET EDGE (844-738-3343)
Customer Service: info@proedgetechnology.com

Copyright 2018 | Pro Edge Technology, LLC | All Rights Reserved