CALL TODAY: 844 PET EDGE (844-738-3343) Main | About| Support | Financing | Contact





 
PET III Edgebander

PET III is designed for the highest processing quality, speed and extreme duty demands with an
added Pre-Mill Station and a motorized positioning pressure beam. The Pre-Mill Station ensures your product’spreviously machined edge has a perfect finish. The Pre-Mill Station defines the difference
between an“acceptable” machined edge and a “perfect” machined edge.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.

Pre-Mill
| Glue Station | Strip Feed System | Guillotine | 4-Roller Pressure Station
2 Motor End Trim
| Rough Trim | Super Finish | Flat Scrape | Buffing



PET SERIES EDGEBANDERS FLAT TABLE CNC ROUTERS CNC Beam Saw WIDE BELT SANDERS RETURN CONVEYORS CORNER ROUNDING CNC BORE & DOWEL INSERTER FEED-THRU HORIZONTAL PTP AIR COMPRESSORS
IR Linear Dryer BORING MACHINES CNC DOVETAILING SLIDING TABLE SAWS DUST COLLECTION HINGE INSERTER POD & RAIL POINT TO POINT
 
 
Process Photos:
 
 
Additional Photos:
 
   
 
Features:
 

PRE-MILL STATION: The Pre-Mill Station comes standard with (2) compression diamond tipped milling heads. The compression diamond tipped milling heads are used to remove any tooling marks left from panel saws or other processing methods in order to achieve a better adhesive bond and a higher quality finish. Our high frequency counterrotating cutter heads run at a rate of 12,000 rpm with adjustable tracers and digital numerical positioning indicators. And a pneumatic plunge and retraction PLC controlled machining operation.

GLUE STATION: To ensure a precisely metered glue application on the edge of the panel, our heavy-duty, non-stick coated, glue pot comes with an independent variable-speed drive. The pneumatic controlled glue metering cylinder allows a more accurate amount of glue to the board’s edge. Our hardened glue application roller and the quick heat-up time ensures years of trouble-free service.

STRIP FEED SYSTEM: Our Strip Feed System was specially designed for a smoother intake of coil-type material ranging from 0.4mm to 3mm edge thickness, and stackable pre-cut material such as wood strips or plastic laminates. The Strip Feed has an independent cut-off switch when using long laminate strips or pre-cut material.

GUILLOTINE: An adjustable pneumatic controlled Guillotine with an independent switch for cutting PVC tape, 3mm PVC tape and all types of wood veneers and plastic laminates. The heavy-duty hardened knife ensures a longer life of quality cuts.


4-ROLLER PRESSURE STATION: The 1st roller applies even pressure across the entire edge of the panel; the 2nd and 3rd rollers are conically shaped to apply pressure on the top and bottom of applied edge; and the 4th roller reapplies even pressure across the entire edge of the panel. Each roller is pneumatically pressurized to ensure a strong adhesion between the panel to the glue and the glue to the edge banding. The heavy-duty drive transmission ensures the rotation speed of the 1st roller matches the feed speed of the machine.


2 MOTOR END TRIM STATION: (2) high frequency end trim motors sit in a secure machined way with manual locking devices ensuring an accurate vibration free end trim with a high quality cut on both thin and thick edges of banding. Both motors can be independently tilted from a 0° to 15° bevel. Precision linear prismatic bearing guides ensure a flawless end trim.

ROUGH TRIM STATION: (2) high frequency motors are adjusted and set to remove 95-to -98% of the machined top and bottom edge giving a higher quality and accurate edge from the following top and bottom Super Finish Trim Station.

SUPER FINISH TRIM STATION: (2) high frequency motors are manually adjusted to tilt from a 45° to 90° bevel for the final finish top and bottom trim of the panel. Manual adjustments are “locked” in place to ensure there is no movement from any vibration. This station is also equipped with an air blow-off on the top cutter and dust collection on both top and bottom cutters.


FLAT SCRAPER STATION: The Flat Scraper Station is used to remove any residual glue left on the panel caused by squeeze-out. The flat scraper ensures a clean joint on both sides of the panel surface.

BUFFING STATION: (2) independent, heavy-duty 3-phase motors soften and polish the sharp edges on the panel. The Buffing Station has (2) fully adjustable universal mounts for easy adjustment. Buffers can be used with either cloth or abrasive discs.

Click Here to View Return Conveyors!
 
 
 
Unheard Of Industry Leading Warranty
We believe in all of our products and because of that, all of our products come with a 2 Year Limited Warranty.

After the Sale, It's the Service that Counts!
Call Today: 844 PET EDGE (738.3343)
 
 
 
 
 
Pro Edge Technology, LLC
P.O. Box 539 | Ellenton, FL 34222
Ph 844 PET EDGE (844-738-3343)
Customer Service: info@proedgetechnology.com
Stay Up To Date with Our Latest Promotions by Following
Us on Social Media and Subscribing to Our eNewsletters:
Copyright 2018 | Pro Edge Technology, LLC | All Rights Reserved | Click Here to Contact Webmaster