CALL TODAY: 844 PET EDGE (844-738-3343) Main | About| Support | Financing | Contact





 
PET IV Edgebander

PET IV is our overachiever! This machine has all the stations mentioned on the previous models, plus: (2) motor Corner Rounding Station, 3mm Radius Scrape Station, (2) Hot Air Blowers, a Misting Station and a complete dust manifold with hardware.

The PET series edgebanders are setting the new industry standard for feed speeds and performance! Our edgebanders come with three selectable speeds, 12m/min, 16m/min and 20m/min. full two motor corner rounding can be produced at both 12m/min and 16m/min feed speeds.

Pre-Mill | Glue Station|Strip Feed System|Guillotine|4-Roller Pressure Station|
2 Motor End Trim|Rough Trim | Super Finish | 2 Motor Corner Rounding
3mm Radius Scrape | Flat Scrape | 2 Hot Air Blowers | Misting Station | Buffing




PET SERIES EDGEBANDERS FLAT TABLE CNC ROUTERS CNC Beam Saw WIDE BELT SANDERS RETURN CONVEYORS CORNER ROUNDING CNC BORE & DOWEL INSERTER FEED-THRU HORIZONTAL PTP AIR COMPRESSORS
IR Linear Dryer BORING MACHINES CNC DOVETAILING SLIDING TABLE SAWS DUST COLLECTION HINGE INSERTER POD & RAIL POINT TO POINT
 
 
Process Photos:
 
 
Additional Photos: Click Below to View what our customers
are saying about the PET 4 Edgebanders:
 
 
 
Features:
 

PRE-MILL STATION: The Pre-Mill Station comes standard with (2) compression diamond tipped milling heads. The compression diamond tipped milling heads are used to remove any tooling marks left from panel saws or other processing methods in order to achieve a better adhesive bond and a higher quality finish. Our high frequency counterrotating cutter heads run at a rate of 12,000 rpm with adjustable tracers and digital numerical positioning indicators. And a pneumatic plunge and retraction PLC controlled machining operation.

GLUE STATION: To ensure a precisely metered glue application on the edge of the panel, our heavy-duty, non-stick coated, glue pot comes with an independent variable-speed drive. The pneumatic controlled glue metering cylinder allows a more accurate amount of glue to the board’s edge. Our hardened glue application roller and the quick heat-up time ensures years of trouble-free service.

STRIP FEED SYSTEM: Our Strip Feed System was specially designed for a smoother intake of coil-type material ranging from 0.4mm to 3mm edge thickness, and stackable pre-cut material such as wood strips or plastic laminates. The Strip Feed has an independent cut-off switch when using long laminate strips or pre-cut material.

GUILLOTINE: An adjustable pneumatic controlled Guillotine with an independent switch for cutting PVC tape, 3mm PVC tape and all types of wood veneers and plastic laminates. The heavy-duty hardened knife ensures a longer life of quality cuts.


4-ROLLER PRESSURE STATION: The 1st roller applies even pressure across the entire edge of the panel; the 2nd and 3rd rollers are conically shaped to apply pressure on the top and bottom of applied edge; and the 4th roller reapplies even pressure across the entire edge of the panel. Each roller is pneumatically pressurized to ensure a strong adhesion between the panel to the glue and the glue to the edge banding. The heavy-duty drive transmission ensures the rotation speed of the 1st roller matches the feed speed of the machine.


2 MOTOR END TRIM STATION: (2) high frequency end trim motors sit in a secure machined way with manual locking devices ensuring an accurate vibration free end trim with a high quality cut on both thin and thick edges of banding. Both motors can be independently tilted from a 0° to 15° bevel. Precision linear prismatic bearing guides ensure a flawless end trim.

ROUGH TRIM STATION: (2) high frequency motors are adjusted and set to remove 95-to -98% of the machined top and bottom edge giving a higher quality and accurate edge from the following top and bottom Super Finish Trim Station.

PQC - Pneumatic Quick Change Technology:
Fast, precise movement on the 1st & 2nd Super Finish Stations and Radius Profile Scraper Station for selected material to applied; all completed at the touch pad without opening the hood and making manual adjustments when switching between predetermined thicker banding width.



SUPER FINISH TRIM STATION: (2) high frequency motors are manually adjusted to tilt from a 45° to 90° bevel for the final finish top and bottom trim of the panel. Manual adjustments are “locked” in place to ensure there is no movement from any vibration. This station is also equipped with an air blow-off on the top cutter and dust collection on both top and bottom cutters.

PQC - Pneumatic Quick Change Technology:
Fast, precise movement on the 1st & 2nd Super Finish Stations and Radius Profile Scraper Station for selected material to applied; all completed at the touch pad without opening the hood and making manual adjustments when switching between predetermined thicker banding width.


2 MOTOR CORNER ROUNDING STATION: (2) high frequency motors with radius tooling are used for trimming straight, chamfered, bull-nosed and post formed panels. The pendulum motion on the 1st trimmer motor, mills the bottom leading and trailing edge with a horizontal and vertical tracing wheel adjustment. The pendulum motion on the 2nd trimmer motor, mills the top and leading and trailing edge with horizontal and vertical tracing wheel adjustment. This station comes standard with 3mm radius carbide tooling.

3MM RADIUS SCRAPE STATION: The 3mm radius top and bottom scrapers ensure optimum finish on thick PVC edges. Vertical and horizontal copy wheels produce precise and secure material removal without any vibration. Scraper extraction and a container to collect scrapings comes standard on the PET IV. This station is followed by an independent Flat Scraper Station.

PQC - Pneumatic Quick Change Technology:
Fast, precise movement on the 1st & 2nd Super Finish Stations and Radius Profile Scraper Station for selected material to applied; all completed at the touch pad without opening the hood and making manual adjustments when switching between predetermined thicker banding width.


FLAT SCRAPER STATION: The Flat Scraper Station is used to remove any residual glue left on the panel caused by squeeze-out. The flat scraper ensures a clean joint on both sides of the panel surface.

2 HOT AIR BLOWER STATION: Top and bottom Hot Air Blowers for bringing the high gloss shine back to the PVC banding after the 3MM Scrape Station.

MISTING STATION: A Misting Station used for spraying different chemicals on the top and bottom of the panel; such as: anti-static coolant agent, cleaning agent or protecting agent.

BUFFING STATION: (2) independent, heavy-duty 3-phase motors soften and polish the sharp edges on the panel. The Buffing Station has (2) fully adjustable universal mounts for easy adjustment. Buffers can be used with either cloth or abrasive discs.

Click Here to View Return Conveyors!
     
Addition Feature:
 
A complete dust extraction manifold and mounting hardware; you only need to supply (1) 8” connection at the beginning of the machine.​
 
 
 
 
Unheard Of Industry Leading Warranty
We believe in all of our products and because of that, all of our products come with a 2 Year Limited Warranty.

After the Sale, It's the Service that Counts!
Call Today: 844 PET EDGE (738.3343)
 
 
 
 
 
 
Pro Edge Technology, LLC
P.O. Box 539 | Ellenton, FL 34222
Ph 844 PET EDGE (844-738-3343)
Customer Service: info@proedgetechnology.com
Stay Up To Date with Our Latest Promotions by Following
Us on Social Media and Subscribing to Our eNewsletters:
Copyright 2018 | Pro Edge Technology, LLC | All Rights Reserved | Click Here to Contact Webmaster