CALL TODAY: 844 PET EDGE (844-738-3343) Main | About |IWF 2018| Support | Financing | Contact





 

Return Conveyors

Pro Edge Technology’s Return Conveyors are specifically designed to meet the high demand for material handling saving you labor cost while streamlining your work flow. Our automatic return conveyor incorporates a fast, simple and highly effective transfer system increasing your daily production goals.

 







PET SERIES EDGEBANDERS FLAT TABLE CNC ROUTERS CNC Beam Saw WIDE BELT SANDERS RETURN CONVEYORS CORNER ROUNDING CNC BORE & DOWEL INSERTER FEED-THRU HORIZONTAL PTP AIR COMPRESSORS
IR Linear Dryer BORING MACHINES CNC DOVETAILING SLIDING TABLE SAWS DUST COLLECTION HINGE INSERTER POD & RAIL POINT TO POINT
 
 
36” Return Conveyor
 

The operating principle of the receiving table with a mechanized raising of all of the round roller belts transferring the part onto rollers gently transferring it 90 degrees to the parallel return conveyor. Once the panels have cleared the receiving table the round roller belts return to their lowered position to receive the next work piece. The pass line between the receiving table and the parallel return is approximately 50mm to avoid interference when oversized panels are traveling in opposite directions.

The in-feed receiving table comes STANDARD with a SMALL PART DIVERTER and a ROLLER HOLD DOWN for oversized parts.

The operating speed of the return conveyor is automatically set to match the operator’s selected speed of the edgebander via the HMI.

 
 
  • Motorized in-feed receiving rollers are extended to parallel the edgebander’s out-feed track.

  • Small in-feed roller belt to assist small parts when exiting the edgebander’s out-feed track.

  • 2 (two) adjustable photo eyes to divert small parts across multiple return rollers.

  • Hold down rollers to prevent oversized parts from tipping while being fed onto the receiving table.

  • In-feed receiving table ships as 1 (one) complete unit.

 
  • Extended out-feed table comes STANDARD allowing oversized parts to rotate back onto the receiving table.
 
  • Heavy duty welded from construction.

  • Heavy duty gear box with chain drive.

  • Variable feed speeds, adjustable up to 28m/min. Comes preset at 12, 16 and 20 m/ min for PET Edgebanders.

  • Oversized heavy duty air cylinders.
 
  • Clean, well-organized control panel design.

  • Delta VFD (Variable Frequency Drive).

  • Delta PLC (Programmable Logic Controller).

  • Voltage: 220V/3-Ph.
 
 

Specifications:

  • Variable Feed Speeds: Adjustable up to 28 m/min.

  • Min. Part Size: 4” x 12”.

  • Max. Part Size: 48” x 48”, without outrigger.

  • Max Part Size: 48” x 96”, with outrigger and minimal assistance from operator.

  • Optional Widths in 24”, 48”, & 60”, built to order.

  • Voltage: 220V / 3-Ph.
 
AFTER THE SALE, IT’S THE SERVICE THAT COUNTS!!! | 844.738.3343
 
 
 
 
Pro Edge Technology, LLC
P.O. Box 539 | Ellenton, FL 34222
Ph 844 PET EDGE (844-738-3343)
Customer Service: info@proedgetechnology.com
Stay Up To Date with Our Latest Promotions by Following
Us on Social Media and Subscribing to Our eNewsletters:
Copyright 2018 | Pro Edge Technology, LLC | All Rights Reserved | Click Here to Contact Webmaster